GENERAL PURPOSE RFID LABELS

These labels are designed for use with standard RFID readers and are stocked in a variety of inlay types and sizes. They are available in paper and synthetic materials that work on non-metallic surfaces, plastics or corrugate. Typical applications include labeling of cases, pallets, products and healthcare specimens. Zebra’s RFID labels have been tested and optimized to work with Zebra’s RFID printers and readers.

• 3″ ID, 8″ OD Thermal transfer RFID labels
• 3″ ID, 5″ OD Thermal transfer RFID labels
• 3″ ID, 8″ OD Direct thermal RFID labels
• 3″ ID, 5″ OD Direct thermal RFID labels
• 0.75″ ID, 2.25″ OD Direct thermal RFID labels

ADVANCED RFID LABELS

These labels offer a higher level of read performance than our general purpose labels. Regularly used in retail, healthcare and manufacturing applications. Typical applications include the same as General Purpose labels where longer read ranges are required.

• 3″ ID, 5″ OD Thermal transfer RFID labels
• 3″ ID, 8″ OD Thermal transfer RFID labels

SPECIALTY RFID LABELS For use with Overhead Readers

These omni-directional, dual-dipole RFID labels are optimized for use with overhead readers.

• 3″ ID, 5″ OD Thermal transfer RFID labels
• 3″ ID, 8″ OD Thermal transfer RFID labels

SPECIALTY SILVERLINE RFID LABELS

Silverline labels, offered exclusively by Zebra, are available in different sizes and thicknesses to meet the needs of a wide variety of applications. Designed and verified for use only with Zebra’s custom ZT410 Silverline RFID printer.

• Silverline Classic     Spec Sheet > Read Range on metal up to 5 m/16 ft, Plastic up to 4 m/13 ft, Liquid containers up to 2 m/7 ft | Tag dimensions 100 x 40 x 0.8 mm / 3.94 x 1.57 x 0.03”
• Silverline Classic M4i     Spec Sheet > Read Range on metal up to 6 m/20 ft | Tag dimensions 100 x 40 x 1,1 mm / 3.94 x 1.57 x 0.04”
• Silverline Blade     Spec Sheet> Read Range on metal up to 4.5 m/15 ft, Plastic up to 1.5 m/5 ft, Liquid containers up to 3 m/10 ft | Tag dimensions 60 x 25 x 1.2 mm / 2.36 x 0.98 x 0.047”
• Silverline Slim     Spec Sheet > Read Range on metal up to 4 m/13 ft, Plastic up to 3 m/10 ft, Liquid containers up to 3 m/10 ft | Tag dimensions 110 x 13 x 0.8 mm / 4.33 x 0.51 x 0.03”
• Silverline Slim M4i     Spec Sheet > Read Range on metal up to 4 m/13 ft | Tag dimensions 100 x 13 x 1,1 mm / 3.94 x 0.51 x 0.04”
• Silverline Micro     Spec Sheet > Read Range on metal up to 1.2 m/4 ft, Plastic up to 1 m/3 ft, Liquid containers up to 1 m/3 ft | Tag dimensions 55 x 14 x 0.8 mm / 2.17 x 0.55 x 0.03”
• Silverline Micro M4i     Spec Sheet > Read Range on metal up to 1.5 m/5 ft | Tag dimensions 45 x 13 x 1,1 mm / 1.77 x 0.51 x 0.04”

UHF GEN 2 RFID CARDS

Containing a patented antenna design and Monza® 4QT chip, this passive RFID smart card offers advanced sensitivity for enhanced read rates and range, plus full read/write capabilities. UHF Gen 2 RIFD Card Spec Sheet >

DUAL RF RFID CARDS

Get the best of both world’s with this single card that combines the benefits of HF Mifare and UHF Gen 2 Pasive RFID technology. Dual RF Cards Spec Sheet >

Honeywell RFID Smart Labels

RFID Smart Labels combine the most current UHF inlays with a variety of printable materials to offer a broad selection of products suitable for a wide range of applications. Thermal transfer or direct thermal printing and chip encoding enable on demand generation of durable RFID labels and tags. Typical applications:

• Compliance
• DoD
• Inventory Management
• Asset tracking
• Consumer goods distribution
• Document and record tracking

RFID Tags & Media Guide